BlackBerry As Modem For Laptop

HOWTO: BlackBerry As Modem For Laptop
Introduction
Did you know that BlackBerry can now be used just like an external modem for a laptop computer, so that a laptop can have full Internet access? This is useful when you need to do certain things that a BlackBerry cannot yet do. Increasing numbers of success reports have caused me to post this message. (Note: Mark Rejhon has not himself yet successfully used a BlackBerry as a modem; I am aggregating information). Sometimes, it is still tricky to set up a BlackBerry as a modem for a laptop, but this feature is becoming more and more common in cellphones, and BlackBerry models are following suit.
.
Credits
Credit goes to Scoobydoo, bfrye, bollar, VitaminB, jmounts, webtoker, dozment and countless others for their contributions.
.
Supported BlackBerry Models
Model 710X: Success (Rogers, T-Mobile)
Model 7290: Success (Rogers, AT&T, Cingular, T-Mobile)
Model 7250: Success (Verizon)
Model 8100: Success (T-Mobile)
Model 8700: Success (Rogers, Cingular)
Model 7130e: Success (Verizon, Bell Mobility)
Model 7510/7520/7230/7280/7730/7780/7100i: Use www.mobishark.com
All Older Models: Use www.mobishark.com
.
IMPORTANT:
Other Models Than Listed Above: There is no modem built in. However, you can use third-party modem software called Shark Modem at MobiShark Online Blackberry Store: Home of Shark Modem
.
Supported Carriers
Carrier AT&T: Success!
Carrier Rogers: Success!
Carrier Vodafone: Success!
Carrier T-Mobile: Success!
Carrier Verizon: Sometimes Successful
Carrier Cingular: Sometimes Successful
Carrier Nextel/Telus: May need to use www.mobishark.com
Carrier Sprint: May need to use www.mobishark.com
Carrier Bell Mobility: 7130e Confirmed, Must use www.mobishark.com otherwise
Currently, Rogers, AT&T, T-Mobile, and Vodafone UK are reported to work. Sometimes and Cingular works, but is much harder to setup. No confirmations for other carriers yet.
Important: If you are using a BES 4.0 server, your BES 4.0 server, you should not use the "Disable IPmodem" setting. BES hosting providers such as eOutlook/Mailstreet/BES4U/MyBlueberry must avoid setting the "Disable IPmodem" setting.
.
Connect Your BlackBerry
Make sure your BlackBerry is connected by USB cable, and your BlackBerry Handheld Manager is running (just launch BlackBerry Desktop to run it.) This is necessary for using the BlackBerry as an external modem. You cannot use BlackBerry as a modem unless you have BlackBerry Handheld Manager running in the background!
.
Modem Driver Install
If you installed a recent version of BlackBerry Desktop that came with a 7100t, 7290, 7250, or 7520, it should include modem drivers and already be automatically installed. In the event you need to manually install them, the modem drivers should be located in this directory:
C:\program files\Common Files\Research In Motion\Modem Drivers
However, if you are having problems with these drivers, uninstall, delete all leftover RIM files, and then reinstall the latest version of BlackBerry Desktop.
.
Verify The Modem Driver Exists
Go to Control Panel -> Phone & Modem Options. In the Modems tab, you should see a new "Standard Modem" on a new port (such as COM6 or COM11). If you do, jump to the next step.
However, if your modem is missing:
If this modem entry is missing and cannot be found using Plug n Play, you may have to manually add it. Verify you have "RIM Virtual Serial Port" drivers installed. Find out which COM ports the RIM Virtual Serial Ports are, go to Control Panel -> System -> Hardware -> Device Manager -> Ports (COM & LPT) ... This will tell you which COM ports your BlackBerry Modem is on. Next, go to Control Panel -> Phone and Modem and Remove the modem. Re-add the modem by clicking on Add. You MUST select the "Standard 33600 bps Modem" (correct) INSTEAD OF "Standard 56000 bps Modem" (wrong). Click Next. You will be asked for the ports to add this modem to. Add this modem to all COM ports that the RIM Virtual Serial Port is on. You must choose the "Standard 33600 bps Modem" because of incompatible AT commands that result in an Error 628. Don't worry, the speed won't be slower.
.
Verify The Modem Driver Is Functioning
Go to Control Panel -> Phone & Modem Options. In the Modems tab, you should see a new Standard Modem on a new port (such as COM6 or COM11). Click Properties -> Diagnostics -> Query Modem. You should see the following:
Quote:
ATQ0V1E0 - OK
AT+GMM - BlackBerry IPmodem
AT+FCLASS=? - OK
AT#CLS=? - OK
AT+GCI? - OK
AT+GCI=? - OK
ATI1 - Research In Motion / BlackBerry IPmodem
ATI2 - Research In Motion / BlackBerry IPmodem
ATI3 - Research In Motion / BlackBerry IPmodem
ATI4 - Research In Motion / BlackBerry IPmodem
ATI5 - Research In Motion / BlackBerry IPmodem
ATI6 - Research In Motion / BlackBerry IPmodem
ATI7 - Research In Motion / BlackBerry IPmodem

Note: This may look different on Nextel 7520, or Sprint/Verizon/Bell Mobility 7250. This is normal. Just make sure there is a response at all, rather than no response.
.
IMPORTANT SPECIAL CONFIGURATION STEP
Click Properties -> Advanced and add only ONE of the following Extra initialization commands with the appropriate carrier-specific APN Setting:

TMOBILE USA Users (Success!)
+cgdcont=1,"IP","wap.voicestream.com"

Rogers Users (Success!)
+cgdcont=1,"IP","internet.com"

Cingular Blue/AT&T Users (Success!)
+cgdcont=1,"IP","proxy"

Cingular Orange Users (Success!)
+cgdcont=1,"IP","ISP.CINGULAR"

UK Vodafone Users (Success!)
+cgdcont=1,"IP","internet"

Verizon Users (Success!) - Keep blank
Nextel/Telus iDEN Users (untested) - Keep blank
Sprint/Bell Mobility CDMA Users (untested) - Keep blank
.
Add A New Internet Connection
Close the Phone and Modem Options and the Control Panel. Create a new connection with Start -> Connect To -> Show all connections -> Create a new connection.
Quote:
1. Click Next

2. Select "Connect To The Internet" then Next

3. Select "Set up my connection manually" then Next

4. Select "Connect using a dial-up modem" then Next.

5. Check only the Standard Modem (if prompted).

6. Give the connection a name such as "BlackBerry Modem", then Next.

7. On the next screen, pick one of the following phone numbers, depending on your carrier:
....If you use GSM/Cingular/AT&T/TMobile: Enter phone number *99#
....If you use iDEN/Nextel/Telus: Enter phone number S=2
....If you use CDMA/Verizon/Sprint/Bell Canada: Enter phone number #777

8. Click Next.

9. On the next screen, pick one of the following, depending on your carrier:

....If you use Cingular Blue, AT&T or Nextel:
.........Username: (blank)
.........Password: (blank)

....If you use Rogers Canada:
.........Username: wapuser1
.........Password: wap

....If you use Cingular Orange:
.........Username:
.........Password: CINGULAR1

....If you use T-Mobile:
.........Username: (Your existing TMobile.com Username)
.........Password: (Your existing TMobile.com Password)

....If you use Verizon, replace 8005551212 with your phone number:
.........Username:
.........Password: 8005551212

....If you use Sprint:
.........Username: (Your existing Sprint PCS Username)
.........Password: (Your existing Sprint PCS Password)

....If you use Bell Mobility, replace 8005551212 with your phone number:
.........Username:
.........Password: (Your Bell Mobility Voicemail PIN)

10. Clear all checkboxes ("Use...when anyone..." and "Make this the default...")

11. Click Finish

.
Disable IP Header Compression
Make sure TCP/IP Properties (Advanced) "Use IP Header Compression" checkbox is NOT checked. To verify this, do these steps:
Quote:
1. Start Menu->Network Connections->"BlackBerry Modem"
2. Click Properties Button
3. Click Networking Tab
4. Select "Internet Protocol (TCP/IP)"
5. Click Properties Button
6. Click Advanced... Button
7. Disable "Use IP header compression" checkbox
8. Click all OK buttons to close all dialogs

Also make sure you clear all these checkboxes, if you see any of these checked:
Turn off "Enable Hardware Flow Control"
Turn off "Enable Modem Error Control"
Turn off "Enable Modem Compression"
.
BES Configuration
Skip this step if you are not on BES. You only need to follow this step if your company gave the BlackBerry to you. If you are at a company and you are on a BES 4.0, your Administrator must enable the "BlackBerry IPModem" setting on the BES. This is a new setting in the Version 4.0 of BES.
.
Surf On The Laptop!
Connect to the Internet on the laptop by clicking the "BlackBerry Modem" icon via Start Menu->Network Connections. No username or password is needed.

生物多樣性消失 治病良方恐隨之喪失

專家今天警告，如果人類不改變數千種植物與動物物種快速滅絕的狀況，全球可能因此失去大量的新抗生素與治病良方。

專家引述一本即將發行的新書中提出的研究指出，生物多樣性消失的狀況已達到令人憂心的程度，而治療疼痛、感染，與癌症等疾病的秘方也將會隨之消失。

聯合國環境計畫署署長史丹納說，超過一萬六千種已知物種正面臨絕種危機。

史丹納在聯合國贊助召開的「環保商業會議」的場邊舉行記者會說：「我們必須針對生物多樣性面臨的變化有所作為。」

史丹納說：「社會依賴大自然來治療疾病。人類歷史上衛生系統的基礎建立在用於治療的動物與植物產品上。」

他說，十九與二十世紀科技革命讓人類尋找治療方法的焦點，不再放在大自然，藥廠相當依賴科技成分來製藥。

隨著這些藥廠耗盡化合物，他們漸漸開始轉向大自然。

但史丹納說，全世界「甚至在我們有機會了解或解開秘密之前，即已失去了大自然的智慧財產權」。

他說：「這就是不了解生物多樣性的悲劇。」

這本即將發行的新書「維繫生命」（SustainingLife），在記者會中預先公布，書中以澳洲 「胃育蛙」為例，這種青蛙一九八零年代在澳洲雨林中發現，如今已絕種。

根據該書作者表示，如果針對這種以胃部當作育兒袋的青蛙進行研究，可能有助於對預防與治療消化性潰瘍有新的了解；單在美國 即兩千五百萬人罹患此病。

粉葛湯紓緩關節痛

類風濕性關節炎並非一般老人常見的「風濕骨痛」，而是一種以對稱性、多關節炎為主要臨表現的慢性全身性自身免疫病，多見於中年女性，通常在冬天起病，此病類似中醫所稱的痹證。

中醫認為，患此病者大多氣血營衛虧虛，同時又受到風寒濕熱諸邪及外傷的侵襲，加上居住環境不良、勞累過度、體質素虛等誘因，引發此病。治療宜標本兼顧，一方面益氣養血，滋補肝腎；另一方面亦要根據病情採用驅風散寒，清熱勝濕，活血化瘀，通經活絡，並採局部外洗、針灸等治法。

參考食療

註：食療僅供參考，不能代替類風濕性關節炎的常規治療，如有疑問，應先諮詢註冊中醫師

■益氣除濕湯（2人分量）

材料：北、葛根、茯苓、丹參各3錢，當歸2錢、蜜棗1粒、果皮1角、瘦肉適量

功效：益氣養血，除濕通絡。適合此症後期或穩定期、關節僵硬變形、腫脹痠痛、氣短困倦、面色晃白、舌淡苔白等患者食用

■清熱通絡湯（2人分量）

材料：粉葛半斤、土茯苓5錢、赤小豆4錢、蜜棗1粒、果皮1角、瘦肉適量

功效：清熱利濕，通經活絡。適合此症急性活動期、症見關節腫痛、局部灼熱發紅、遇涼痛減、小便短赤、舌紅苔黃等患者食用

製法：藥材洗後，用6碗水先泡20分鐘，再加入其餘材料共煮1至2小時，調味即成

Life is too short

Life is too short to wake up in the morning with regrets, so love the people who treat you right, forget about the ones who don't, and believe that everything happens for a reason. If you get a chance, take it. If it changes your life, let it. Nobody said life would be easy, they just promised it would be worth it

Learn To Love

You learn to like someone when you find out what makes them laugh, but you can never truly love someone until you find out what makes them cry.

即食麵新菜

今年是出前一丁即食麵誕生四十周年，筆者日常貪方便也會自煮一包，
再加入雞蛋、餐肉及生菜等食材，簡單又方便。
不過，一包平凡的即食麵，落在大廚手中，即帶來全新的食法，
將傳統「一丁」變成焗得又炸得的美味西菜。
這次「一丁」食法新體驗，像首創的「吞拿魚一丁Pizza」（做法參考DIY 3），由番茄醬、出前一丁即食麵、吞拿魚、黑水欖、水牛芝士及餅底組合而成，沒想過經二百度高溫焗製後，口感可以如此豐富，餅底跟麵身非常香脆，配上啖啖魚香，層次感極強，味道一流！

麵條過冷河更爽彈

即食麵可塑性高，只需配上恰當的醬汁和湯料，便可創出全新食法，如將之替代意粉，配上煙肉、白菌及忌廉汁，即成「煙肉白菌忌廉一丁」（做法參考DIY 2）。師傅提醒說：「記得先將麵條過冷河，麵質才會爽彈。」而原本已經過炸製的即食麵，可否再以多次油炸烹調呢？答案是︰「可以！」師傅即席拿出一碟裹上了麵條的「一丁炸龍婣柳」（做法參考DIY 1），效果猶如炸芋絲蝦，咬落有嚼勁，內裏卻甚為清香鮮嫩，蘸些沙律醬吃更加滋味。

DIY 1一丁炸龍婣柳

評價： 鬆脆可口，配沙律醬或他他汁，即成簡約清新的主菜。

材料（2人分量）

即食麵 1包
魚柳 4條
鹽 適量
他他汁或沙律醬 適量
油 適量

做法

1. 將煮好的麵條包裹覑用鹽醃過的魚柳，將魚柳雪一晚，以防油炸時散開。
2. 以慢火炸約7分鐘即可。


DIY 2煙肉白菌忌廉一丁麵

評價：口感比意粉更細滑輕盈。

材料（1人分量）

即食麵 1包
煙肉 2片
白菌 2個
芝士 1片
忌廉汁 半杯
蛋黃 1個
三文魚子 適量

做法

1. 煙肉切粒，連同白菌、芝士炒香後，加入忌廉汁和煮好的一丁麵。
2. 上碟後加入生蛋黃及三文魚子伴碟即成。


DIY 3吞拿魚一丁薄餅

評價：一次過盡嘗脆、軟、鮮香，味覺豐富。

材料（4人分量）

即食麵 1包
餅底 1個
番茄醬 適量
黑水欖 3粒
洋裢 半個
吞拿魚肉 300克
水牛芝士 適量

做法

1. 餅底先鋪上番茄醬，再放一丁麵、黑水欖、洋裢、吞拿魚和水牛芝士。
2. 放入200度焗爐焗製約7分鐘即成。

BlackBerry Handheld - Transaction error - decryption error

--------------------------------------------------------------------------------
Doc ID : KB01608
Last Modified : 2007-11-06
Document Type : Support



Print this page

Environment
BlackBerry® Enterprise Server for Microsoft® Exchange
BlackBerry smartphone


--------------------------------------------------------------------------------


Problem
An X is displayed in the message list on the BlackBerry smartphone, indicating the email message could not be sent. The following error appears in the Message Status field of the open email message:

Transaction error - decryption error



--------------------------------------------------------------------------------


Cause
A decryption error may be caused by any of the following:

The encryption key on the BlackBerry smartphone has not been updated.
BlackBerry® Desktop Redirector is running on more than one computer.
A conflict exists because your BlackBerry smartphone was previously associated with another account.
The encryption keys on the BlackBerry smartphone and the Microsoft Exchange Server are not identical.
The BlackBerry smartphone information stored for your account is corrupt.
A duplicate of your BlackBerry smartphone personal identification number (PIN) is registered on the BlackBerry Enterprise Server.
The Messaging Application Programming Interface (MAPI) profile is corrupt.
The current encryption key is corrupt either on the BlackBerry smartphone or in the Microsoft® Outlook® mailbox.
The encryption key has not been correctly transferred to the BlackBerry smartphone.
Cached Exchange Mode is turned on in Microsoft Outlook 2003 and it has caused the encryption key to be saved in the wrong location.


--------------------------------------------------------------------------------


Resolution
Complete the appropriate resolution for your cause.

Cause 1
The encryption key on your BlackBerry smartphone has not been updated; therefore, it does not match the key used by the BlackBerry Enterprise Server on which your BlackBerry smartphone user account resides.

Resolution
Generate a new encryption key. For instructions, see the Additional Information section.


--------------------------------------------------------------------------------

Cause 2
BlackBerry® Desktop Redirector is running on more than one computer.

Resolution
Verify that BlackBerry Desktop Redirector is only running on one computer.


--------------------------------------------------------------------------------

Cause 3
A conflict exists because your BlackBerry smartphone was previously associated with another BlackBerry smartphone user account. The BlackBerry smartphone information was not removed from the previous account’s mailbox before it was added to your mailbox.

Resolution
Remove the BlackBerry smartphone information causing the conflict. The following steps should be completed by your system administrator.

Remove the previous BlackBerry smartphone user’s account from the BlackBerry Enterprise Server. If you are prompted to wipe the client database, click Yes.
Clear all BlackBerry smartphone information from the previous BlackBerry smartphone user’s mailbox. You will need to use the DBClean utility to perform this task. Contact your service provider for instructions on how to use the DBClean utility.

--------------------------------------------------------------------------------

Cause 4
The encryption keys on the BlackBerry smartphone and the Microsoft Exchange Server are not identical.

Resolution
Delete the Desktop [CMIME] service book on the BlackBerry smartphone and generate a new encryption key.

Disconnect the BlackBerry smartphone from the computer running BlackBerry® Desktop Manager.
On the BlackBerry smartphone Home screen, click the Options icon.
Click Service Book. The Service Book screen appears listing the service books installed on the BlackBerry smartphone.
Note: If the Desktop [CMIME] service book is not listed, then it is not installed on the BlackBerry smartphone. Go to Cause 5.

Click Desktop [CMIME] then click Delete. The Desktop [CMIME] service book is deleted.
Press the Back button until you return to the Home screen.
Connect the BlackBerry smartphone to the computer. A new Desktop [CMIME] service book will be installed on the BlackBerry smartphone.
Open BlackBerry Desktop Manager.
Generate a new encryption key. For instructions, see the Additional Information section.

--------------------------------------------------------------------------------

Cause 5
The BlackBerry smartphone information stored for your BlackBerry smartphone user account is corrupt.

Resolution
Remove and replace the corrupt information.

Contact your system administrator and request that your BlackBerry smartphone user account be removed from the BlackBerry Enterprise Server. During the account removal, the system administrator must click Yes if prompted to wipe the client database.
Connect your BlackBerry smartphone to the computer running BlackBerry Desktop Manager.
Open BlackBerry Desktop Manager and double-click the Backup and Restore icon.
Back up the BlackBerry smartphone data. For instructions, see Backup and Restore in the BlackBerry Desktop Online Help.
After the backup is complete, return to the BlackBerry Desktop Manager and double-click the Application Loader icon.
Reload the BlackBerry smartphone applications and remove the BlackBerry smartphone data. Make sure that you select Erase all currently installed applications. For assistance with this task, see Application Loader in the BlackBerry Desktop Online Help.
After the applications have been loaded, contact your system administrator and request that your BlackBerry smartphone user account be added to the BlackBerry Enterprise Server.
Generate a new encryption key. For instructions, see the Additional Information section.

--------------------------------------------------------------------------------

Cause 6
Duplicate BlackBerry smartphone PIN is registered on the BlackBerry Enterprise Server. A BlackBerry smartphone can only be assigned to one account at a time.

Resolution
Remove the duplicate BlackBerry smartphone personal identification number (PIN) from the BlackBerry Enterprise Server. The following steps should be completed by your system administrator.

In the BlackBerry Enterprise Server, find the BlackBerry smartphone user account to which the duplicate PIN is assigned.
Remove the BlackBerry smartphone user account from the BlackBerry Enterprise Server.

--------------------------------------------------------------------------------

Cause 7
The MAPI profile is corrupt.

Resolution
Create a new MAPI profile and configure BlackBerry Desktop Manager to use that profile. For instructions on creating a MAPI profile, search for article 195718 on the Microsoft Support web site. For instructions on configuring BlackBerry Desktop Manager to use the new MAPI profile, see KB03650.
Close BlackBerry Desktop Manager.

--------------------------------------------------------------------------------

Cause 8
The current encryption key is corrupt either on the BlackBerry smartphone or in the Microsoft Outlook mailbox.

Note: If you are running Microsoft Outlook 2003 and you have Cached Exchange Mode turned on, see Cause 10.

Resolution 1
Warning: The following procedures will delete either all data or all data and applications on the BlackBerry smartphone. Back up the data prior to wiping your BlackBerry smartphone. For instructions, see KB12487.

Clear the service Book database on the BlackBerry smartphone, run the DBClean utility, then generate a new encryption key.

Connect your BlackBerry smartphone to the computer running BlackBerry Desktop Manager.
In BlackBerry Desktop Manager, double-click the Backup and Restore icon.
On the Backup and Restore window, click Advanced.
On the Backup/Restore window, in the Handheld Databases list box, select the Service Book database and then click Clear.
On the Warning window, click OK. The Service Book database is erased on the BlackBerry smartphone.
Click Close until the BlackBerry Desktop Manager window is displayed.
Close the BlackBerry Desktop Manager.
Note: If you are using BlackBerry Desktop Redirector, skip step 8.

Contact your service provider for instructions on how to use the DBClean utility.
Open BlackBerry Desktop Manager and connect your BlackBerry smartphone to the computer.
You should be prompted to generate a new encryption key. If not, generate a new encryption key. For instructions, see the Additional Information section.
Resolution 2
Upgrade the BlackBerry Desktop Software to 4.0 Service Pack 1 or later, and then generate a new encryption key.

Close BlackBerry Desktop Manager and BlackBerry Desktop Redirector.
Perform a clean uninstall of the BlackBerry® Desktop Software. For instructions, see KB02206.
Download BlackBerry Desktop Software 4.0 Service Pack 1 from your service provider’s web site.
Install the software by double-clicking the downloaded file and following the installation wizard. For more information, see the section Installing the Desktop Software in the BlackBerry Desktop Software Release Notes.
After the installation is complete, open BlackBerry Desktop Manager.
Connect the BlackBerry smartphone to your computer.
In BlackBerry Desktop Manager, on the Options menu, click Connection Settings. The Connection Settings window appears.
Click Detect. The BlackBerry smartphone should be detected.
Click Close.
Generate a new encryption key. For instructions, see the Additional Information section.

--------------------------------------------------------------------------------

Cause 9
The encryption key has not correctly transferred to the BlackBerry smartphone.

Resolution
Install the latest BlackBerry Desktop Software. Back up all the data from the BlackBerry smartphone to your computer, then delete all data and applications on the BlackBerry smartphone and create a new encryption key.

Download the latest BlackBerry Desktop Software and service packs from your service provider’s web site.
Install the software by double-clicking the downloaded file and following the installation wizard.
After the installation, open BlackBerry Desktop Manager.
Connect the BlackBerry smartphone to your computer.
In BlackBerry Desktop Manager, double-click the Backup and Restore icon.
Back up the BlackBerry smartphone data. For instructions, see Backup and Restore in the BlackBerry Desktop Online Help.
After the backup is complete, return to the BlackBerry Desktop Manager and double-click the Application Loader icon.
Reload the BlackBerry smartphone applications and remove the BlackBerry smartphone data. Make sure that you select the check box beside Erase all currently installed applications. For instructions, see Application Loader in the BlackBerry Desktop Online Help.
After the applications have been loaded, generate a new encryption key. For instructions, see the Additional Information section. If the problem is not resolved, contact your service provider.

--------------------------------------------------------------------------------

Cause 10
If you have Cached Exchange Mode turned on in Microsoft Outlook 2003, then you may have generated a new encryption key since turning this feature on. As a result, the new encryption key has been written to the offline folder created by Cached Exchange Mode, instead of the Microsoft Outlook mailbox. This causes a discrepancy between the encryption key on the BlackBerry smartphone and the encryption key in the mailbox.

Resolution
Clear the Service Book database on the BlackBerry smartphone, run the DBClean utility, and then generate a new encryption key.

Turn off Cached Exchange Mode in Microsoft Outlook. For instructions, see Turn on or off Cached Exchange Mode in the Microsoft Office Outlook Help.
Connect the BlackBerry smartphone to the computer running BlackBerry Desktop Manager.
In BlackBerry Desktop Manager, double-click the Backup and Restore icon.
On the Backup and Restore window, click Advanced. The Backup/Restore window appears.
In the Handheld Databases list box, select the Service Book database, and then click Clear.
On the Warning window, click OK. The Service Book database is erased on the BlackBerry smartphone.
Click Close until the BlackBerry Desktop Manager window is displayed.
Close the BlackBerry Desktop Manager.
Note: If you are using BlackBerry Desktop Redirector, skip step 9.

Contact your service provider for instructions on how to use the DBClean utility.
Open BlackBerry Desktop Manager and connect your BlackBerry smartphone to the computer.
You should be prompted to generate a new encryption key. If not, generate a new encryption key. For instructions, see the Additional Information section below.
If you want, you may turn back on the Cached Exchange Mode in Outlook.


--------------------------------------------------------------------------------


Additional Information
To generate a new encryption key, complete the following steps:

Connect your BlackBerry smartphone to the computer running BlackBerry Desktop Manager.
Open BlackBerry Desktop Manager.
Double-click the Redirector Settings icon.
Select the Security tab.
Select the Generate keys manually option.
Click Generate.
Move your mouse around randomly until the Generating New Key dialog closes.
Click Apply.
Verify that the Status field displays Up To Date.
Click OK.

--------------------------------------------------------------------------------

To regenerate an encryption key, complete the following steps:

On the BlackBerry smartphone, go to Options > Security Options > General Settings
Scroll down to Services and select Desktop [sxxxxx] (sxxxx is the srp identifier)
Display the menu and select Regenerate Encryption Key.

--------------------------------------------------------------------------------

To update the encryption key, delete the Desktop[CMIME] service book, and generate an encryption key using one of the methods mentioned above.

越南旅遊資料

旅遊人生 討論區 的一個香港男生由旺角到河內
http://www.travellife.org/thread-23238-4-1.html

Pacific Airlines 提供平價內陸機票由河內 至 胡志明, 不過要預先訂票.
http://www.pacificairlines.com.vn/Select.aspx